Polyamide yarn light&heat stabilized type 502

Index	BISFA standard symbols	Meas. unit	Index value
1. Nominal linear density	LD	dtex	935	1440	1870	700
2. Number of filaments in complex yarn			140	210	280	140
3. Deviation of actual linear density from the nominal one		%	± 3,0
4. Tenacity, min		mN/dtex	85			82
5. Coefficient of variation of tensile strength between packages, max	CV_B	%	3,0
6. Yarn elongation at break, max	EAB	%	25			24
7. Number of twists per 1 m of yarn		tpm	0
8. Hot air shrinkage (in dry state), max	HAS	%	8			6±1
9. Heat resistance, min		%	90
10. Number of entangling points per 1 m of yarn, min		pcs	4
11. Spin-finish content (petroleum-ether), max		%	1,2
12. Weight of a bobbin		g	(5000-11500) ± 500			9200±500
13. Type of a bobbin			cylindrical bobbin
14. Yarn shade of spin-finish oil, stabilizers and modifiers between the bobbins			not admitted
15. Yarn shade of spin-finish oil, stabilizers and modifiers inside the bobbins			not admitted
16. Length of transfer tail, min		м	1,0

Tube length, mm 290,5 Inner diameter, mm 75

Each bobbin with yarn is wrapped up with paper or polymeric foil. Bobbins are put onto a pallet with forming a block-package using interlayers while palletizing. A cover is put on the top of block-package. A block-package is strapped and stretch-foiled.

Quality control is performed according to the regulations of JSC «Grodno Azot» in force.

Min. 500 meters of upper yarn layer should be unwound from each bobbin before starting tests.